AeroPress Flow Control Filter Cap
AeroPress Flow Control Filter Cap
AeroPress Flow Control Filter Cap
AeroPress Flow Control Filter Cap

AeroPress Flow Control Filter Cap

$34.95 Sale • Save

Achieve barista-level precision with the new AeroPress Flow Control Filter Cap, eliminating unwanted drips for a smoother brew. 

How It works: it allows you to let the coffee dwell (coffee word for steep) as long as you want without gravity causing it to start dripping before you plunge. 

This cap fits perfectly on the AeroPress Original, AeroPress Go and AeroPress Clear coffee makers and can be used with metal and paper filters. 

Polypropylene with no phthalates or bisphenol-A (It's BPA-free!)

 

 


Customers rate us 5.0/5 based on 390 reviews.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Brew Guide

Our head roasters have always vouched to brew what tastes good to you. We use these guides as a starting point and a general process through each method to brew the best coffee.

Aeropress

  1. Place the top portion of the brewer upside down on table
  2. Fit the bottom section over the rubber basket (At this point the numbers should be upside down on both parts of the brewer.)
  3. Put in 15 grams of medium ground coffee
  4. Pour in hot water to top (around 250 grams)
  5. Stir and make sure there are no dry grounds hiding at the bottom
  6. Let sit for 45 seconds
  7. Affix the filter cap with a wetted paper filter into the fitting (this should be at the top at this point) and depress a tiny bit so the slurry is close to the filter.
  8. Carefully invert the entire brewer onto your heated mug and press to the bottom.

Worth A Try